The Elite Omni Control Board is used on the CSW-200, SL-3000 AND Hercules overhead operators. It is the latest version of the control board and contains many innovations over previous models. It is a simple PLUG-AND-PLAY modular unit which can be replaced by simply unplugging a few wire connectors.Modular Board Uses LEDs to indicate all input and
output functions of the gate operator.
ERD If the gate hits a vehicle while closing, it re-opens.
If it hits a vehicle while opening, it stops,
reverses 4 to 6 inches and stops again.
Digital Motor Protection Entrapment sensor shuts off the motor after it reaches the stall amp for 3
seconds, reverses direction for several inches, and
Electronic Inputs Radio receiver, key switch, safety
loop, center loop, telephone entry system, computer
input, fire dept. key switch & 3-push-button station.
Timer Adjustable timer can be set from 3 to 60
Power Input On/Off Switch Controls power input to
the board with convenient switch.
Power Management Board includes electronic
power management with over current shutdown and
Magnetic Lock With Omni Option board, magnetic
lock system is incorporated, allowing you to easily add
the MG1300 electromagnetic locking system to the
Burglar Alarm With Omni Option board, interfaces
with existing home alarm or alarm output.
3 Push Button Control On board gate operator
control for close, stop, and open.
Intelligent Master/Slave Precise, synchronized
movement and communication between two gate
operators using 3 wire RS-485 bi-directional
Spike Suppressors Fast response time (50
nanoseconds) when subject to an impulse surge
(lightning strike) up to 100 amps.
Alternate Outputs With Omni Option Board 3 push
button command control, burglar alarm input and
Gate Traveling Time Adjusted by a precision
mechanical device and electrical limit switch system.
Integrated Loop Detectors Easy to install, modular,
plug in loop detector inputs for exit loop, center loop,
and safety loop.
120 VAC Power Built-in 120 VAC power receptacle
Motor Drive Solid-State electronic motor drive
system is incorporated into board.
Safety Alarm If the gate hits an object twice while
opening or closing, the system will shut down and
alarm will sound for five minutes. After five minutes the
system will automatically reset itself. To reset the
system during the five minutes, a manual reset button
must be used.